Kelmore – One Coat DPM Fast
Price range: £98.99 through £166.99
Kelmore – One Coat DPM Fast is a fast-curing, solvent-free 2-part epoxy damp proof membrane designed to control residual moisture and rising damp on concrete and screed subfloors.
Product Description
| Category | Specification / Information |
|---|---|
| Product Name | One Coat DPM Fast |
| Product Type | Fast curing 2-part epoxy damp proof membrane |
| Areas of Use | Floors, Interior & Exterior, Domestic & Commercial, Heated Screeds |
| Pack Sizes | 5kg & 10kg |
| Colour | Blue |
| Application Temperature | ≥ 10°C |
| Working Time (@20°C) | Approx. 20 minutes |
| Cure Time (@20°C) | Approx. 4½ hours |
| Key Benefit | Combats residual construction moisture and rising damp |
| Suitable Where Structural DPM is Absent | Yes |
| Moisture Tolerance – Cementitious Screeds | Up to 98% RH |
| Moisture Tolerance – Calcium Sulphate / Anhydrite Screeds | Up to 90% RH |
| Suitable for Heated Screeds | Yes |
| Solvent Free | Yes |
| Fast Drying | Yes |
| Suitable Subfloors | Cementitious screeds, calcium sulphate/anhydrite screeds, concrete, ceramic tiles, porcelain tiles, natural stone tiles |
| Compatible Levelling Compounds | LevelMore Absolute 30, LevelMore Pro, LevelMore Flex&Fibre |
| Mixing Method | Mix Part A resin with Part B hardener fully using a low-speed paddle mixer until uniform |
| Application Method | Apply using V-notched trowel and smooth with short-pile roller |
| Recommended Trowels | A2, B1, B2 |
| Minimum Thickness – ≤87% RH | 250 microns |
| Minimum Thickness – 88–98% RH | 300 microns |
| Minimum Thickness – Full DPM Required | 350 microns |
| Minimum Thickness – Calcium Sulphate / Anhydrite Screeds | 350 microns |
| Coverage – 5kg (A2 Trowel) | Up to 12.5m² |
| Coverage – 5kg (B1 Trowel) | Up to 10.5m² |
| Coverage – 5kg (B2 Trowel) | Up to 9m² |
| Coverage – 10kg (A2 Trowel) | Up to 25m² |
| Coverage – 10kg (B1 Trowel) | Up to 21m² |
| Coverage – 10kg (B2 Trowel) | Up to 18m² |
| Drying Time | Hard, dry and tack-free after approx. 4½ hours at 20°C |
| Priming Requirement | PrimeMore Grip can be applied after curing |
| Primer Exemption | No primer required when using LevelMore Absolute 30 or LevelMore Pro within 24 hours |
| Surface Preparation | Surface must be clean, sound, dry and free from contaminants |
| Underfloor Heating Guidance | Switch off 48 hours before commencing work |
| Maximum Recommended Temperature | Avoid application above 30°C |
| Movement Joints | Must not be bridged |
| Crack Repair | Can be mixed with dry sand to fill static joints and cracks |
| Cleaning | Clean tools immediately before product cures |
| Shelf Life | 24 months |
| Storage Conditions | Store unopened between 5°C and 25°C |
| Health & Safety | Appropriate PPE required |
| Standards | Use in accordance with relevant British & European Standards |
Kelmore – One Coat DPM Fast is a high-performance, fast-curing 2-part epoxy damp proof membrane designed to protect floor installations from residual construction moisture and rising damp. Suitable for both residential and commercial applications, it can be used on a wide range of subfloors including concrete, cementitious screeds, calcium sulphate/anhydrite screeds, heated screeds, and existing tiled surfaces.
Formulated to accommodate moisture levels up to 98% RH in cementitious screeds and concrete, and up to 90% RH in calcium sulphate/anhydrite screeds, One Coat DPM Fast provides a reliable solution where a structural damp proof membrane is absent or ineffective. Its solvent-free, fast-drying formulation allows for quicker project turnaround times, becoming hard, dry, and tack-free in approximately 4½ hours at 20°C.
Designed for ease of application, the product is applied using a V-notched trowel and roller to create a smooth, continuous coating free from pinholes. It is also fully compatible with Kelmore moisture tolerant levelling and smoothing compounds, making it ideal for professional flooring preparation prior to installing adhesives or floor finishes
Additional Information
| Size | 5kg, 10kg |
|---|
Price & Sample Enquiry
For a pricing or sample enquiry for this product, please include as much information below as possible. For accurate delivery costs, please include your address and all contact details.
Delivery Times
Please check below and read the full information on our delivery information page regarding your order.
Please note that your order is subject to our usual stock and delivery checks. If there are any issues with your order, we will be in contact ASAP. If you have any questions and/or would like to discuss your order with the team, or you have particular delivery requirements, please give us a call on 01373 812250.
Karndean, Invictus, Victoria, Tarkett, Lifestyle and Furlong LVT
4-8 business days
Please note that Karndean heritage orders are made to order with a lead time of 6-8 weeks
Luvanto and Woodpecker products
1-3 business days
Related Products
Floor Preparation
Floor Preparation
Floor Preparation
Floor Preparation